Duct Materials
The duct shall be extruded from either medium density polyethylene type II, class C, category 5, or high density polyethylene type III, class C, category 5 as outlined in ASTM D1248.  Available in black or orange as shown.

Duct Dimensions
The following duct dimensions are recommended, however, AWG will provide duct to customer's required dimensions when specified.


The cable shown in the illustration is Quadruplex Conductor Type URD Cable - Aluminum Conductor
Request Information
Unit of Measure
Items
Cable in Duct

Powerguard Medium Voltage Cable in Duct
Cable in Duct

Powerguard Medium Voltage Cable in Duct
Cable in Duct

Powerguard Medium Voltage Cable in Duct
Conduit
Size
(in) 		N/A 1 1/4 N/A 1 1/2 N/A 2
Conduit
Outer
Diameter
(in) 		N/A 1.66 N/A 1.90 N/A 2.38
Minimum
Wall
Thickness
(mls) 		N/A 100 N/A 115 N/A 145
Bending
Radius
(in) 		N/A 18 N/A 21 N/A 26
Max.
Cable
Diameter 		N/A 1.05 N/A 1.20 N/A 1.5
Typical
Unjacketed
Cond. Size 		N/A #2 through 2/0 N/A 1/0 through 250 N/A 4/0 through 500
Elongation
(%) 		N/A 400
Melt
Index
Max 		N/A .4
Brittleness
Temp.
ºC max.
Medium 		N/A -45ºC
Brittleness
Temp.
ºC max.
High 		N/A -75ºC