Duct Materials
The duct shall be extruded from either medium density polyethylene type II, class C, category 5, or high density polyethylene type III, class C, category 5 as outlined in ASTM D1248. Available in black or orange as shown.

Duct Dimensions
The following duct dimensions are recommended, however, AWG will provide duct to customer's required dimensions when specified.

The cable shown in the illustration is Quadruplex Conductor Type URD Cable - Aluminum Conductor

Unit of Measure

Items	1-1/4 Powerguard Medium Voltage Cable in Duct	1-1/2 Powerguard Medium Voltage Cable in Duct	2 Powerguard Medium Voltage Cable in Duct
Conduit Size	N/A 1 1/4 Inches	N/A 1 1/2 Inches	N/A 2 Inches
Conduit Outer Diameter	N/A 1.66 Inches	N/A 1.90 Inches	N/A 2.38 Inches
Minimum Wall Thickness	N/A 100 mls	N/A 115 mls	N/A 145 mls
Bending Radius	N/A 18 Inches	N/A 21 Inches	N/A 26 Inches
Max. Cable Diameter	N/A 1.05 Inches	N/A 1.20 Inches	N/A 1.5 Inches
Typical Unjacketed Cond. Size	N/A #2 through 2/0	N/A 1/0 through 250	N/A 4/0 through 500
Elongation	N/A 400 %
Melt Index Max.	N/A .4
Brittleness Temp. ºC max. Medium	N/A -45 ºC
Brittleness Temp. ºC max. High	N/A -75 ºC