Powerguard® Medium Voltage Cable in Duct
Duct Materials
The duct shall be extruded from either medium density polyethylene type II, class C, category 5, or high density polyethylene type III, class C, category 5 as outlined in ASTM D1248.
Duct Dimensions
The following duct dimensions are recommended, however, AWG will provide duct to customer's required dimensions when specified.
Contact us for compatible cable constructions.
The cable shown in the illustration is PowerGuard® 35kV MV Aluminum TR-XLPE Collection System Cable LLDPE Jacket UL MV-90/AEIC CS8-07
UPDATED 02/14/2024
Conduit
|
N/A 2 Inches |
Conduit
|
N/A 2.38 Inches |
Minimum
|
N/A 145 mls |
Bending
|
N/A 26 Inches |
Max.
|
N/A 1.5 Inches |
Typical
|
N/A 4/0 through 500 |
Tensile Strength Min. - Medium |
N/A 2400 psi |
Tensile Strength Min. - High |
N/A 3200 psi |
Elongation |
N/A 400 % |
Melt
|
N/A .4 |
Thermal Stress Crack Resistance-no cracking, hrs, min. - Medium |
N/A 96 hrs |
Thermal Stress Crack Resistance-no cracking, hrs, min. - High |
N/A 168 hrs |
Environmental Stress Crack Resistance-hrs to 20% Failure min. 48 - Medium |
N/A 48 min. |
Environmental Stress Crack Resistance-hrs to 20% Failure min. 48 - High |
N/A 48 min. |
Brittleness
|
N/A -45 ºC |
Brittleness
|
N/A -75 ºC |
