Corporate Headquarters
2980 NE 207th Street | Suite PH
Miami, FL 33180
Toll-Free: 800.342.7215 (US and Canada only)
Phone: 954.455.3050
Fax: 954.455.9886
Email: sales@buyawg.com
Print Back
Applications
As flame-retardant three or four conductor power cables rated 600 volts, 90 Deg. C. in wet or dry locations. Specifically approved for installation in cable trays per Article 336 of the NEC. Type TC cable is also approved for use in Class I and II, Division 2 hazardous locations. Cables may be installed in open air, in ducts or conduits, in tray or trough, or direct buried.

Construction
Class B stranded uncoated copper conductor, XLPE crosslinked polyethylene insulation, surface print phase identification. Three or four insulated conductors twisted with a Class B stranded uncoated copper grounding conductor and suitable fillers, cable tape, PVC jacket overall, surface printed.

Standards
  1. Listed by UL as Type TC per Standard 1277 for Tray Cables.
  2. Individual conductors UL listed as Type XHHW-2.
  3. Overall jacket UL listed as Sunlight Resistant.
  4. Cables pass UL and IEEE-383 ribbon burner flame tests.
  5. Cables pass IEEE1202/CSA FT4 (70,000 BTU/hr) cable tray flame test (2 AWG and larger).
  6. Cables UL listed for Direct Burial.
  7. Cables UL listed for Open Wiring.
  8. Cables meet requirements of ICEA S-9568/NEMA WC70.
Notes
  • AMPACITY in accordance with the National Electrical Code for cables in uncovered cable tray without maintained spacing and for cables in raceway or directly buried; at the conductor temperature indicated, in wet or dry locations, 30ºC ambient temperature.
  • Grounding conductor per UL Standard 1277 for Type TC Tray Cable.
Options
  • Bare or Tinned Copper
  • Flexible stranded conductors
  • E1 or E2 color codes
  • EPR Insulation
  • CPE, CSPE, LSOH jackets
  • Overall copper tape shield
  • Overall copper braid shield
  • Overall longitudinal corrugated copper shield
  • Overall Mylar tape shield with drain wire
  • 1000 volt rated construction
Consult AWG for a variety of alternate constructions for specific applications.

Specifications

No. of
Conductors

 N/A 3

Size
(AWG or kcmil)

 N/A 8

Conductor
Strand

 N/A 7/.0486

Ground
Wire
Size
AWG

 N/A 10

Nominal
Insulation
Thickness
(in)

 N/A 0.045

Nominal
Insulation
Thickness
(mm)

 N/A 1.14

Nominal
Jacket
Thickness
(in)

 N/A 0.06

Nominal
Jacket
Thickness
(mm)

 N/A 1.52

Nominal
Cable
O.D.
(in)

 N/A 0.640

Nominal
Cable
O.D.
(mm)

 N/A 16.26

Copper
Weight
lbs/MFT

 N/A 190

Copper
Weight
kg/km

 N/A 283

Net
Weight
lb/MFT

 N/A 314

Net
Weight
kg/km

 N/A 467